CLICK HERE TO SEE A BIGGER PICTURE !

SMM35532E15LS
Industrial Laser Line Guide Green 15mW 532nm
 Line  24' Long
This unit will deliver a Line beam that can be projected on a surface as a guide line. It is very good for locations very well illuminated. It can be used in concrete, Marble, Granite, Lumber and Steel cutting machines as well as many other industrial applications where a visible straight Guide line is needed.
SEE MORE PICTURES BELOW
Model No. SMM35532E15LS
  Wavelength 532  nm
  Spatial Mode TEM00 
  Output Power 15 mW
  Residual IR (1064&808nm) <0.01%
  Operation Current 0.150 A
  Operation Mode CW
  Line width  ~2mm
  Pointing Stability <0.1 mrad
  Beam Divergence 0.5 mrad
  Power Stability* <5% per 2 hrs
  Temperature Stabilizing TEC
  Warm Up Time <5 minutes
  Beam Quality (M2) <1.2
  Optimum Operating Temp. 20~30oc
  Storage Temperature 10~50oC
  MTTF** 5000 hrs
  Dimensions Small Dia 30mm x Dia 40x Len 82 mm
  Power Supply 95/240VAC - 50/60KHz (Included)
  Weight 12 Oz.

 PLEASE CLICK ON THE PICTURES BELOW AND OPEN THEM ON A FULL WINDOW 

Line on Floor of our Warehouse. Laser Module at 7' up from floor.
 Line on Ceiling of our Warehouse. Light fixture can give an idea of line length.
 Line on Wall. Concrete blocks can give an idea of line length.

CLICK HERE FOR THE LASER MAIN PAGE
Our Laser Diodes, Laser Modules and Laser Accessories are designed solely as OEM components for incorporation into the customer's end products. Therefore, the above mentioned products do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If needed, customers should submit their own finished product to FDA for certification for the product as a whole
CLICK HERE FOR LASER CLASSES SAFETY GUIDELINES

 CLICK TO SHOP FOR LASERS

 LASER  HOME   -   CONTACT